PropOne Prop Wash – 2 Sizes available



Taxes and shipping are calculated at checkout.

For more information, please see our terms of service and shipping policy.


Looking to get the best out of your PropOne application? Use Prop Wash to thoroughly clean your metal surfaces. 

Choice of 2 sizes available: 250mL and 1 Litre

PropWash is designed to thoroughly clean your bronze and stainless steel surfaces, removing contamination that you can’t see. This ensures that your metal surfaces are properly prepared for a new PropOne application.

  • Recommended preparation cleaner before PropOne application.
  • Necessary for new or reconditioned metal surfaces.
  • Removes contaminants you can’t see, improving PropOne system adhesion.
  • Brightens underwater metals, leaving them looking brand new.

Do not use on anodes or polished metal surfaces!


Estimated Prop Wash Coverage Guide:
Propeller Size and Number of Blades

18″- 24″ 24″- 36″ 36″- 48″
Three or four blades Four or five blades Five blades
Running gear components to be cleaned One propeller 250mL Prop Wash 250mL Prop Wash 250mL Prop Wash
Two propellers 250mL Prop Wash 250mL Prop Wash 1 Litre Prop Wash
Two propellers, two rudders
two propeller shaft struts
250mL Prop Wash 250mL Prop Wash 1 Litre Prop Wash
Two propellers, two rudders, two propeller shaft struts & two trim tabs 250mL Prop Wash 1 Litre Prop Wash 1 Litre Prop Wash


PropOne Silicone Remover: 15 sqm per litre (3 sqm per 200mL)
PropOne Paint Stripper: 15 sqm per litre (3 sqm per 200mL)


Prop Wash

PropOne Application Guide

Surface Preparation

  1. Remove marine growth & existing coatings from metal surfaces.
  2. Abrade the metal with a mechanical grinder, wire wheel or by hand sanding (80-120 Grit).
  3. For newly polished/repaired metals, abrade the metal surfaces to remove any slight surface oxidisation.
  4. Rinse metal surfaces with clean fresh water, ensuring that any abrasive residue is fully removed.

Surface Cleaning

  1. Apply Prop Wash using a clean cloth to scrub the surface. Do not allow to dry.
  2. Rinse surface with clean fresh water and wipe with a clean damp white cloth.
  3. Repeat until cloth shows no discolouration.
  4. Solvent wipe metal surfaces with acetone using a separate clean cloth.
  5. Keep metal surfaces dry and free from contaminants, do not touch surface.
  6. Continue with PropOne foul release coating application

Customer Reviews

Based on 1 review
Ian Moore
PropOne is The 1

Prompt service and great product. Highly recommend GreenCorp Marine